|
Projects
Ongoing Projects
-
Efficient numerical techniques of two-phase transport model in the
cathode of hydrogen polymer electrolyte fuel cell, UNLV,
supported by
NSF Grant
DMS-0913757,
9/15/2009 – 8/31/2012
-
Numerical studies of heat transfer and mechanical effects due to
thermal-inertia loading for PEMFC stack in
sub-freezing environment, Tongji University, supported by
Chinese 111-Program for energy-saving and environment-friendly
automotive (B08019).
Participated Projects
-
Fast
numerical simulations of 3D hydrogen-type proton exchange membrane
fuel cell (PEMFC), UNLV, supported by
UNLV Research Grant, RDA 08–Sun, 7/18/2008 – 7/31/2009.
-
Advanced Algorithms research, fast solver development and parallel finite element simulation on 3D direct methanol fuel cell (DMFC),
with Jinchao Xu and Chaoyang Wang’s groups at
Penn State.
-
Fuel Cell Vehicle and Powertrain System Engineering Technologies,
supported by
Program of Introducing Talents of Discipline –"111-project", College
of Automotive Engineering, Tongji University, China, Summer 2008.
-
Algorithms research and finite element simulation on 3D direct
methanol fuel cell,
with Chaoyang Wang’s group, Electrochemical Engine Center (ECEC),
Penn State University, 2006.
-
Adaptive finite element method for thin film flow,
with Robert Russell, Simon Fraser University, Canada, 2005.
-
3D numerical simulation for Cahn-Hilliard equation derived from
diblock copolymer,
with Rustum Choksi, Simon Fraser University, Canada, 2004.
-
Finite element simulation for PEM fuel cell,
with Chaoyang Wang’s group, Electrochemical Engine Center (ECEC),
Penn State University, 2003.
-
Finite element simulation for black hole binary system,
with Pablo Laguna, Department of Physics, Penn State University,
2003.
-
Phase field method for the fingering of gel,
with Chun Liu and Andrew L Belmonte, Department of Mathematics, Penn
State University, 2003.
-
Adaptive mesh method for convection dominated diffusion problem,
with Long Chen and Jinchao Xu, Penn State University, 2002.
-
CAD application in Shoes Design System,
FEGEN Software Co. Ltd., Beijing, China, 2001.
-
Online Finite Element Program Generator,
FEGEN Software Co. Ltd., Beijing, China, 2001.
-
Finite element computing of two-phase compressible displacement in
porous media,
Harbin Institute of Technology, Harbin, China, 2000.
-
3D computational fluid dynamics for coating die optimal designing,
China Lucky Film Corporation, China, 2000.
-
Stress analysis of pressure vessel,
China National Standardization Committee on Pressure Vessel,
Beijing, China, 1999.
-
Parallel algorithms and software for domain decomposition finite
element method,
National Research Center for Intelligent Computing Systems, Beijing,
China, 1999.
-
Stability analysis of surrounding rock,
China Institute of Water Resources and Hydropower Research, Beijing,
China, 1998.
-
Heat and material conduction on semiconductor chip,
Motorola (China) Electronics Ltd., China, 1998.
-
DDM with non-matching grids and its application on Basin Modeling
with multi-fault and multiphase,
Offshore Oil Exploration and Development Research Center,
China National Offshore Oil Corp., and Hong Kong Polytechnic
University, Hong Kong, 1997.
Typical Problems
Developed Software Packages
-
Adaptive Finite element simulation on thin film flow.
-
Stress Analysis System for pressure vessel.
-
3D Computational Fluid System
for optimal design
of
coating die.
-
Basin Modeling System
for reservoir exploration.
-
Stability Analysis System for elastic and plastic deformation of
wall rock.
-
Shoes Design CAD System.
-
Finite element simulation on fuel cell dynamics.
-
Finite element simulation on black hole binary system.
-
Finite element simulation with phase field method.
-
Parallel finite element codes for domain decomposition method.
-
Adaptive finite element codes with local refinement method.
-
Adaptive finite element codes with moving mesh method.
-
Geometric multigrid solver.
-
Generic Finite Element Package.
|
|
|
